Published

Start by deciding where the light should land. For a worktop, hold a short, lit sample under the cabinet and aim it across the area where people work. For a backsplash, turn the channel toward the wall and check the result from the normal viewing position.
What does 45° mean on a corner LED channel?


A corner channel can sit where two surfaces meet at 90° while holding the LED strip on an angled face. The 45° describes the nominal aiming direction. Beam spread depends on the strip and cover. Mark the mounting surfaces and the direction you want the diffuser to face on your cabinet section.
Where should you mount the channel under the cabinet?


Worktop lighting. Try the sample near the front of the cabinet underside, aimed inward across the counter. Stand where you prepare food and check whether your hands cast a shadow across the working area. Check whether the front trim hides the diffuser or blocks useful light.
Backsplash lighting. Try a position closer to the wall with the opening facing it. Check glossy tiles for a reflected light line. If the cabinet faces seating, sit down and check whether the bright diffuser is directly visible.
Match the profile to the strip and connector



Measure the widest part of the connector or soldered lead if it needs to fit inside the channel. Check the end-cap opening and the space to route the cable. Use the listed strip width to shortlist a model, then check the actual strip, connector and end cap together. See the LED channel size guide for the clearances to measure.
Check the diffuser with the LED strip you plan to order

Check the worktop, backsplash and diffuser from normal viewing positions. If you compare covers, keep the strip and channel the same so you can see what the cover changes. For visible dots, see the dotless lighting guide.
What to send for a sample or quote


Send a cabinet section or underside photo with the mounting position marked. Include cut lengths, quantities, strip width, connector dimensions, finish, diffuser and cable exit side. List clips and end caps so the supplier can quote the complete kit.
Browse Union Opto corner LED profiles · Send your cabinet drawing for a sample and quote
