Published
Two suppliers can both quote a black LED aluminum profile and deliver a different look. One may quote black anodizing, which can retain the metallic character of the aluminum. The other may quote a matte black powder coat. To compare quotes, specify the finish process, color and appearance you want.
Specify the process, desired metallic appearance and approved sample.
Specify the color reference, gloss, texture and approved sample.
When to specify anodizing

Consider anodizing when you want the aluminum to retain a metallic appearance. Ask for a sample of the actual extrusion in the proposed finish. For black anodizing, confirm whether you want a matte or satin appearance and which faces will be visible after installation. Alloy, surface preparation and the finishing process can affect how the finished profile looks.
When to specify powder coating

Consider powder coating when the profile needs an opaque white finish, a textured black finish or a project-specific color. Give the supplier the color reference, gloss and texture. If the profile needs to match a fixture housing or end cap, approve the finished profile next to that part under the intended lighting.
What to put on the drawing or RFQ


| If your drawing says | Add this before requesting a quote |
|---|---|
| Black | Black anodized or black powder-coated, plus the target gloss |
| Silver | If you want clear anodizing, name the process and approve a sample where appearance matters |
| White or a specified color | Powder coating, color reference, gloss and texture |
| Match an existing fixture | Physical reference sample, visible faces and the parts that must match |
Check fit and confirm quantities by finish

If the channel has a tight snap-fit diffuser, a close-fitting end cap or a clip that grips the finished surface, ask for a finished sample and check the fit with the actual parts. For orders with more than one finish, give the supplier the quantity for each finish and confirm whether the minimum applies per color. See how to compare minimum orders.
Send Union Opto the model or drawing, cut length, finish process, color reference, gloss and quantity per finish. If the profile must match another part, include a photo and tell us whether you can send a physical sample.
Explore custom LED aluminum profiles · Request a quoteTechnical references: Aluminum Extruders Council — Anodizing · Aluminum Extruders Council — Painting · Aluminum Anodizers Council — Anodic Coating Specifications
