Custom LED Aluminum Profile MOQ: How to Compare Minimum Orders

Published

Bulk LED aluminum extrusions
Batch of assembled linear LED channels.

A supplier quotes a minimum order of 300 kg. Another quotes 750 pieces. Which order is smaller? You need the profile weight per meter and the cut length to compare them. If the order includes several colors or lengths, you also need to know which quantities can count toward the same minimum.

Start with the production route

Long LED aluminum profiles in protective packagingStock profile
Confirm how much finished stock is available.
Extrusion die storage racks in the workshopMade to order
Confirm whether the order uses an existing die or needs new tooling.
Stock and made-to-order routes have different quantities to confirm. Workshop photo retouched.

Ask whether your order will be cut from available stock, produced using an existing extrusion die, or made with a new die. These routes can have different minimums. If your drawing changes the channel width, wall thickness, or diffuser groove, ask the supplier to review the cross-section before comparing quantities. See when a new extrusion die may be needed.

Convert kilograms to finished pieces

Tape measure alongside a long LED aluminum profile
Measure the finished cut length before converting weight per meter to a piece count.

Suppose the supplier confirms that the MOQ is 300 kg of finished aluminum profiles. The profile weighs 0.20 kg per meter and each piece is 2 m long.

Illustrative example
  1. 300 kg
    Finished aluminum weight
  2. 1,500 m
    Divide by 0.20 kg/m
  3. 750 pieces
    Divide by 2 m per piece

Each piece weighs 0.20 kg/m × 2 m = 0.40 kg, so 300 kg ÷ 0.40 kg gives 750 pieces. These figures illustrate the calculation. If the MOQ refers to the extrusion run, ask how many finished pieces the quote includes after cutting. Confirm whether the weight covers the aluminum body alone or the complete kit.

Confirm what can be combined

Black anodized LED aluminum channel with mounting flanges
Black anodized LED channel example.
Check what can count toward one minimum1 m2 mSilverBlackSame section and finishSame section, different finishes
Ask whether different cut lengths can be combined. Confirm each finish separately before totaling the order.

If you want 1 m and 2 m pieces from the same section, ask whether both lengths can count toward one minimum. If you also need silver and black finishes, ask whether each color has its own finishing minimum. List the diffuser, end caps, clips, and packaging separately so the supplier can flag any separate minimums before you approve the quote.

Send a quantity breakdown with your RFQ

Open shipping carton containing long LED aluminum profiles
Specify finished quantities and packaging requirements on the RFQ.
LED aluminum channel kit with diffuser and mounting parts
Example of a channel kit to specify alongside the order quantity.
Example RFQ for a single profile sectionCut lengthFinishQuantity1 mSilver500 pcs2 mSilver250 pcs2 mBlack200 pcs
Illustrative quantities. List diffuser, end cap and clip requirements separately for each kit.

Include the model or cross-section drawing, cut length, finish, and quantity for each combination. State how many diffusers, end caps, and clips you need per kit. Ask the supplier to show the minimum for the first order, any separate tooling charge, and the finished quantity included. If the first order is for a pilot run, give that quantity separately from your expected repeat demand.

Planning a custom order?

Send Union Opto your drawing and quantity breakdown so we can check stock availability, tooling requirements, and the applicable minimum.

Explore custom LED aluminum profiles · Request a quote
Scroll to Top

Request A Quote

inquiry led aluminum profile