XT-164 Surface Mount LED Aluminum Profile, Low Profile Channel
XT-164 is shown with a shallow rectangular channel with a flat diffuser. It is included in the supplied surface-mount collection. Before specifying the complete assembly, review visible diode images at the actual mounting height.
XT-164 Surface Mount LED Aluminum Profile, Low Profile Channel
XT-164 is shown with a shallow rectangular channel with a flat diffuser. It is included in the supplied surface-mount collection. Before specifying the complete assembly, review visible diode images at the actual mounting height.
1. Main Features of the Surface Mount LED Profile
The supplied XT-164 photo shows a shallow rectangular channel with a flat diffuser. Use that outline to compare the exposed body, light opening and diffuser interface. Similar-looking channels can have different internal clearances and mounting parts. A model code alone does not establish interchangeability.
- Visible form: low profile channel. Confirm the complete dimensions against the selected drawing.
- Selection priority: Review visible diode images at the actual mounting height.
- The housing provides a defined mounting surface for compatible LED tape. Confirm tape adhesion and test the thermal performance of the complete installation.
- A matching diffuser and removable end details can support maintenance. Cover transmission, optical performance and accessory availability need model-specific confirmation.
Catalogue finish examples describe appearance only. They do not establish every colour or accessory as standard supply.
2. Technical Specifications
| Item No. | XT-164 |
|---|---|
| Product type | Surface Mount LED Aluminum Profile |
| Observed structure | |
| Overall width × height | Cross Section |
| LED tape clearance | 8mm LED Strips |
| Aluminum alloy | Anodized |
| thickness | 0.8mm |
| Diffuser | Clear,Opal,Frost and Black |
| Fixing method | Surface Mount |
| Finish / colours | anodized silver, black, white or custom options by model |
| Lengths and accessories | 1m,2m,2.5m or 3m or other, end caps, clips, connectors and packaging |
| Material | Aluminum Profile |
| warranty | 5 Years |
| Drawing status | Approval |
3. Applications of Surface Mount LED Aluminum Channels
Consider XT-164 where the housing can remain visible on a suitable supporting surface. Final suitability depends on fixing, wiring, cover and tape configuration.
Cabinets and shelves
Review the viewing angle beneath cabinetry and at shelf edges. Keep connectors away from visible light openings and provide a practical route to the driver. Confirm the supporting panel can accept the intended fixing.
Retail and display interiors
Test glare and reflected LED images against the actual glass, metal or merchandise finish. A deeper body or curved cover can change appearance, but no beam angle or dot-free result is assumed.
Wall and ceiling light lines
Coordinate the visible body, end caps and cable exits with the interior finish. Confirm load-bearing anchors and service access. Suspension, wet-area use and outdoor exposure require separate model and assembly approval.
4. How to Choose the Right Surface Mount LED Profile
For XT-164, review visible diode images at the actual mounting height. Work through these checks before approving bulk supply.
Selection check 1
Measure the complete external envelope and the smallest clear tape bed. Include connector height and any protective tape jacket.
Confirm the mounting part and substrate
Confirm the mounting part and substrate. Test the real clip or rail before drilling a full run.
Power the intended tape under the selected diffuser
Power the intended tape under the selected diffuser. Evaluate hot spots from the normal viewing distance and angle.
Selection check 4
Check cable exits, end caps, cutting kerf, corners and any joiner. Provide space to remove the cover later.
Selection check 5
Compare the same housing, cover, accessories, finish and packing configuration across quotations.
5. Quality Checks Before Bulk Purchasing
Keep an approved XT-164 sample with the drawing and purchase specification. Measure the features that control installation rather than accepting an approximate external size.
- Inspect straightness, twist, visible-face finish and the mating surfaces of the diffuser.
- Measure agreed wall locations and weight per metre. Ask for material documentation where required.
- Fit and remove the cover and end caps repeatedly. Inspect locking features after the test.
- Install a full sample length on the intended surface. Check fixing engagement, joints and access to the tape.
- Run the selected light engine in the real mounting condition. A photo or heavier appearance is not a verified wattage rating.
- Agree scratch acceptance, length labels, face protection and carton support before shipment.
6. Customization and Project Support
Send the full XT-164 model, marked-up section, desired lengths, quantity, LED tape dimensions and installation surface. Include cover appearance, finish reference, machining, cable exits and delivery destination.
Unionopto can review an existing section against the construction detail and discuss whether a tooling or machining change is necessary.
Request a quotation with housing, cover, end caps, fixing parts, machining, packaging and freight listed separately. Confirm currency, Incoterms, quote validity and payment stages in writing.
7. Request a Quote for Surface Mount LED Aluminum Profiles
Request a sample or drawing review for XT-164. Attach your construction detail and state the required light line, LED tape, quantity and lengths. Flag all unresolved dimensions before placing the order.
