XT-353 Recessed LED Aluminum Profile, Compact Flanged Channel
XT-353 is a compact recessed LED aluminum profile shown with a compact tapered section with a shaped diffuser opening. Review the section and approve the mounting detail before ordering.
1. Main Features of the Surface Mount LED Profile
XT-353 is a recessed LED strip housing for a prepared groove or coordinated mounting detail. The supplied photograph shows a compact tapered section with a shaped diffuser opening. Its section is the useful starting point for comparing the body, trim and diffuser, while the finished lighting effect depends on the complete assembly.
Test the exact diffuser and intended LED density together before bulk ordering.
- A defined housing for a compatible LED tape and cover. Confirm the exact matching parts.
- A section-specific flange or seating detail. A top trim width is not a cut-out width.
- An aluminum mounting surface that can help transfer heat from the tape. The permissible load needs a thermal check.
- A serviceable lighting detail when the diffuser, cable and driver remain accessible.
Test the exact diffuser and intended LED density together before bulk ordering.
Compare the photo with the matching section before selecting accessories.
Diffuser and installation configuration: [TO CONFIRM].
Matching section drawing supplied; annotations require confirmation against an approved drawing.
2. Technical Specifications
| Item No. | XT-353 |
|---|---|
| Product type | Surface Mount LED Aluminum Profile |
| Observed structure | a compact tapered section with a shaped diffuser opening; recess / cut-out dimensions: See Cross Section |
| Overall width × height | See Cross Section |
| LED tape clearance | See Cross Section |
| Aluminum alloy | Anodized |
| thickness | [TO CONFIRM] |
| Diffuser | clear,opal,frost,black |
| Fixing method | [TO CONFIRM] |
| Finish / colours | Silver |
| Lengths and accessories | 1m,2m,2.5m,3m or requirement. |
| Material | Aluminum Profile |
| warranty | 5 Years |
| Drawing status | [TO CONFIRM] |
3. Applications of Surface Mount LED Aluminum Channels
Review these proposed uses against the actual section, substrate and lighting requirement. They describe possible project contexts, not certified performance.
Kitchen and wardrobe joinery
For kitchen and wardrobe joinery, check the XT-353 body against the available construction depth. Test the exact diffuser and intended LED density together before bulk ordering. Build a sample with the chosen tape, cover and finish before approving a full run.
Retail shelves and display cabinets
For retail shelves and display cabinets, check the XT-353 body against the available construction depth. Test the exact diffuser and intended LED density together before bulk ordering. Build a sample with the chosen tape, cover and finish before approving a full run.
Interior wall or ceiling grooves
For interior wall or ceiling grooves, check the XT-353 body against the available construction depth. Test the exact diffuser and intended LED density together before bulk ordering. Build a sample with the chosen tape, cover and finish before approving a full run.
Outdoor, wet-area, fire-rated or load-bearing suitability requires a separate verified specification. A profile photograph does not establish those ratings.
4. How to Choose the Right Surface Mount LED Profile
Start the selection of XT-353 with a marked-up section of the real installation. Test the exact diffuser and intended LED density together before bulk ordering.
Selection check 1
Measure lower-body width and depth, total trim width and the support beneath each edge. Allow for the actual manufacturing and site tolerances.
Selection check 2
Check board thickness, fastening access and whether the housing can be removed after finishing. Confirm the fixing method for this section.
Selection check 3
Test tape, adhesive, solder pads, cables and connectors inside the usable bed. The model identifier does not define strip compatibility.
Selection check 4
Evaluate diffuser fit, LED pitch, optical distance and normal viewing angles together. Confirm the light line with a powered sample.
Plan end caps, corners, cable exits and driver location
Plan end caps, corners, cable exits and driver location. Provide a maintenance path before the recess is closed.
5. Quality Checks Before Bulk Purchasing
Approve a sample of XT-353 and retain it with the signed drawing. A similar outline or a lower quotation does not establish an interchangeable product.
- Check width, height, straightness, flange flatness and cover-retaining features against the approved tolerances.
- Ask for the agreed alloy and temper. Measure wall thickness at defined points and record weight per metre for comparison.
- Inspect visible faces for scratches, uneven coating and colour variation. Compare production lengths under the intended light.
- Fit and remove the cover several times without distorting the retaining edges. Check the supplied end caps and fixing parts.
- Run the proposed tape in the real installation to assess thermal behaviour. A deeper or heavier-looking body is not a verified wattage rating.
- Check carton support, separators, length labels and end protection. Record cosmetic acceptance criteria before shipment.
Approve the sample, drawing and packing specification before mass production.
6. Customization and Project Support
Send the full XT-353 model, marked-up section, desired lengths, quantity, LED tape dimensions and installation surface. Include cover appearance, finish reference, machining, cable exits and delivery destination.
Unionopto can review an existing section against the construction detail and discuss whether a tooling or machining change is necessary.
Request a quotation with housing, cover, end caps, fixing parts, machining, packaging and freight listed separately. Confirm currency, Incoterms, quote validity and payment stages in writing.
7. Request a Quote for Surface Mount LED Aluminum Profiles
Request a sample or drawing review for XT-353. Attach your construction detail and state the required light line, LED tape, quantity and lengths. Flag all unresolved dimensions before placing the order.
